" Hi Bruce, Could you please describe: what is the EM+ machine? Thank You."
The EM+ is a Resonant Radiant Plasma System, which drives the plasma to resonance directly at the specific selected frequency within the range of ~8Hz to 10KHz+. ( This is commonly referred to as the "Rife Frequency" range). It radiates and induces this plasma resonance into everything within the area for many feet out from the plasma tube.
The approach used in the EM+ systems differs from the technological approach used in the Rife/Bare radiant plasma system design in that it does not need or use an RF carrier. In this EM+ system, high voltage signals, which are generated directly at specific selected frequencies, set up and control the characteristics of the plasma resonance within the plasma tubes. Because of the presence of the magneticresonance aspect of the energy field radiated from the plasma tube in these EM+ systems, it easily penetrates through everything without noticable damping of the signal.
(Since 1998, one doctor in the NE U. S. region has used one of the earlier versions of these EM+ systems by setting it up in a small room on one side of a wall, while having the research subject seated in a chair on the opposite side of the wall. They never actually see the tube, but the wall between does not seem to affect the energy field radiated by the plasma tube. One of his previous patients reports that all of his patients continue to respond very consistently to his treatments, and continue to return for further services. NOTE: There are many misleading statements repeated by misinformed marketers, who try to tell people that either an RF carrier or something like a spark gap generated noise signal is required to get penetration, or that it somehow is supposed to be 'enhancing' penetration. From my tests and observations, and after the many years of reports from many researchers on several continents, the information and observatiobns heavily support the exact opposite.
"The cleaner and more controlled the plasma resonance signal radiated from the plasma tube, and the less associated uncontrolled 'noise' present, the more positive the results that are observed, along with dramaticly less of the types of collateral adverse reactions observed which can be experienced with other systems using spark gap generated noise signals and / or RF carriers. "
Additionally, people who already are experiencing some degree of adverse electro-sensitivity reactions from environmental exposures may possibly be able to better tolerate use of a system which has been designed to effectively generate the resonance within the plasma tube without having any noise and / or RF signals added.
Recent reports are now also confirming what has been theorized and observed over the last several years: that in many cases, the body responds more positively, with less collateral adverse reationd experienced, when lower power output level settings are selected. In the midst of the background clammor today of "MORE POWER, MORE POWER, MORE POWER!" that is so prevalent today, this may sound like herasy.... but results speak for themselves.
The EM+ systems offer the unique "Plasma Resonance Optimization Control" which allows you to match and peak the characteristics of the plasma resonance drive signals to the characteristics of the tube (or series of tubes you have chosen to use. ) The plasma resonance characteristics vary noticably between different tubes, arrays of multiple tubes, frequency being run, and power output level selected. This unique plasma resonance optimization circuitry approach and plasma resonance dynamics peaking capability was our innovation in December of 1997, implemented on the earliest versions of the EM+ resonant radiant plasma systems I designed. The approach has been refined in many subsequent circuitry upgrades, to offer the maximum control of the characteristics of the plasma resonance. This plasma resonance radiates from the plasma tube, and is induced into anything in the area.
(Higher harmonics of the primary resonance are also produced and radiated form the resonance set up within the plasma tube; the technical aspects of resonant plasma physics get complex. The research manual that is included with each system touches further on many technical discussions.)
A Tri-Field Meter will display the plasma tube's radiated E-field density at 100,000 volts per meter at a distance of up to about ten feet from a high volume plasma tube driven by this system when running in the most commonly used frequency ranges. It may not be necessary to use maximum outpower in many cases. With multiple outputlevel settings available, it can also be set for comfortable contact mode usage with any tube.
The plasma tubes driven to resonance on the EM+ systems can be used both in a "Radiant Mode", and also can be used applied directly to chosen target areas when desired for even greater amplitude of induced resonance, without danger of the adverse effects of RF exposures and even RF burns that can be a result of use of other 'modulated RF Carrier' based plasma systems which others offer.
Effectively inducing a selected resonance into the chosen area, at appropriate power amplitudes, is what needs to be done to achieve optimum results; The adjustable power output levels available on all of the EM+ systems allows you options, so that you can tailor your usage to rthat which suits your application.
While there is a powerful radiated signal component which can be measured at a distance, the Maximum resonance can be induced when the researcher is both directly in contact with the plasma tube, and also making contact with a stainless steel grounding plate, or with another plasma tube being used as a dynamic 'Receiving Tube'. Many specialized "Plasma Containment Vessel" (tube) designs have been developed specifically for use with the EM+ systems in collaboration with Barry Allred since 1998, some of which exhibit unusual plasma dynamics. Driving two or three plasma tubes simultaneously is now done simply by plugging the tubes into jacks on the control panel, or using couplers; (a photo elswhere on this web site shows 9 plasma tubes being driven by an earlier model EM+ system simultaneously .)
The EM+ anecdotes page on this web site will give you some idea of the results being achieved with these systems, and the frequencies being used.
A new page on this web site offers a list of "Beneficial, Normalizing, and Stimulating Frequencies"- This is another important noted effect of selected induced resonances. Initial research verifying the usefulness of these frequencies was done using these EM+ systems, and reports continue to come in adding to the knowledge base. This use of selected resonant frequencies was not researched in Royal Raymond Rife's early induced resonance work in the 1930's.
Everyone's busy these days, so we simply need to be patient until more results are actually written up & passed along. Much remains to be written when time allows - there are literally entire 'unwritten chapters'.
Frequencies commonly referred to as the "Rife" frequencies can be found in Brian McInturff's "Consolidated Annotated Frequency List", which has been compiled from many sources, and is periodically updated. Visit Turf's ELECTROHERBALISM web site at www.electroherbalism.com for the latest updated version of this list.
The System 5AC+A EM+ it's powerful research equipment that's reported to be producing dramatic results. Is it 'perfect'? There are always areas in which the EM+ series of research systems can and will continue to be improved or enhanced, more features and capabilities added, as research continues. I continue to make this model available, with updated signal generating circuitry, for those who want a less expensive alternative without the computer / frequency synthesizer capability that is included in the 6C and 8CE EM+ systems.
This system also is now built with a special Auxiliary Output Section, designed to provide the dynamic drive outputs required for the optional MagPulse Wands, as well as for the Light Wands, and contact pads or handpieces.
Testing and results reported by researchers since 1999 confirm that this System 5AC+A EM+ is producing a very dynamic resonant output, as far as the radiated E-Field density measured at a distance from the radiant plasma tubes. This is the system version most suitable for those researchers who do not want to deal with a computer or computer controlled frequency synthesizer.
It has also been designed with higher output power level settings available ( 1220 available now on the control panel, versus 300 on early models) , for increased amplitude of the plasma resonant radiant energy field (E-field density). The upper settings are patricularly useful in working with the spiral plasma tube hand pieces, or when the researcher chooses to use it as a radiant mode device. Lower settings may be more appropriate when working with some tubes in the plasma contact mode. [Oscilloscope photos of the waveforms actually picked up form the body can now be seen on the EM+ Technical Details page.]
Since this system is built in a larger instrument case, it is not advisable to transport tubes with it in it's optional aluminum carrying case. A frequency reading meter will fit within the carrying case, as well as the stainless steel grounding plate and the 599+ page research / operation manual. I'd strongly recommend shipping and transporting the plasma tubes within another separate carrying case, and also obtaining the tube support stand (which can also be stored under the foam in the case).
OPTIONAL EXTERNAL 12 VOLT OPERATION : You can have any EM+ system custom built for optional use from an external 12 to 14 volt power supply, as well as the internal AC powered switching power supply. This custom modification includes different control panel graphics, a different three position, center off power switch, an added coaxial power input jack, and an accessory 12 volt 'Car Cord". The "Dual Power" option version is available for an additional $50.00; print out the order page linked below.
The System 5AC+A EM+ is available with or without a list of optional components, tubes, and accessories. For further information on costs, options, etc. please click here to visit THIS PRICE LIST & ORDER PAGE. You need to print it out, fill it out, and mail it to me along with your payment. Call 719-836-2489 if you have further questions; weekday mornings are the best times to find me here and able to talk with you.
The following is the understanding under which research devices and materials are able to be supplied to other individual researchers:
Also understand that everyone receiving research assistance / equipment is expected to share their research results, in order to accellerate the continued development / evolution of this promising approach to Resonant Radiant Plassma Induced Resonance research. )
At first glance, all of those knobs & switches may look a bit complicated, but it doesn't take long to learn how ti run this system. Here's an older copy of the Operating Instructions for the System 5AC EM+, which are included in the ~14 page Operating Instructions Manual. There is also a 599 page EM+ Research Material manual which is included with any research system I agree to supply to another researcher.
(You can use your web browser's "BACK" button to return here after looking over the operating instructions; the version in the book is further expanded and updated. )
Here's a feedback comment from a researcher in Africa:
..." You have produced a near-perfect and very impressive system - I am without fail impressed every time I get to use it
(that frequency is increasing at a breathtaking rate :-) - on no single occasion can/could I report 'No results'!
Congratulations! "
More complex "Plasma Containment Vessels" in specialized shapes and configurations are also available, along with light weight, 'take down' tube support stands and rubber coated jawed support clamps. Above is one of the high volume 'Double Bubble Tubes'.
New plasma tube designs are being designed and evaluated; all of these can be easily plugged into any of these systems. For shipping purposes, it's recommended that any tubes be shipped in a separate case.)
After wading through all of the information on this web site, if you want to call 719-836-2489 on a weekday morning, I will try to answer any further questions. At this time, I'm able to arrange to provide research systems on a limited basis to individual researchers, as a form of consulting & research assistance. I'm typically backlogged with prior commitments for 3 to 4 weeks. The best time to find me answering the phone is on weekday mornings. (Since I type rather slowly, & am always time-challenged, pleasre don't expect me to type out a long email answer to a list of questions... that's what real 'conversations' are for, as one question always leads to another! :>)
My efforts have been directed to advance the evolution of Radiant Plasma Emission Resonant Frequency Induction Devices & Systems, in order to offer enhanced plasma resonant dynamics, and offer better control of the output signal's multiple aspects than was possible with earlier circuitry, drive, and design implementations. We've evolved well beyond the circuitry and dynamic operation modes used in other seemingly similar systems over the coarse of the rapid design evolution of the EM+ systems, and will continue to do so in the future.
We've also obtained reports that impressive, consistent results are being obtained by researchers using this EM+ equipment with Prostate Cancer volunteers; results that were not being obtained with systems using single electrode plasma tubes or other design approaches. It is even more obvious now that, even though the plasma gas can be visibly excited by other drive circuitry designs, that the output may not be as effective, as dynamic, in producing results.
Many researchers are already reporting some promising results using every model from the the "Model 3" through the "System 8CE" evolution stages of the EM+.
Information has been added a bit at a time to various pages on this web site; I therefore have to ask that you bear this in mind when going through this EM+ information. All of this information would perhaps be more coherently presented if it were totally re-written from scratch, but until I have the opportunity to do that, I'm glad to be able to pass on as much information as you can find here now.
Another comment from an EM+ researcher:
THE RADIANT PLASMA TUBE GALLERY: Featuring the many variations available and currently in use Jump to the ARTICLES PAGE:For a Comparison of the EM+ to other Radiant Plasma Systems ans Devices, as well as other articles froim the 450+ page EM+ Research Manual A photo of NINE palsma tubes wired end-to-end, being fired by a typical 1999 EMEM2+ system- just to give you an idea of the capabilities of this design's control system; also, Oscilloscope Waveform Analysis: Photos of EMEM2+ / EM+ output: Technical Details
NEW 7-31-2007: THE SYSTEM 9C EM+, A RADIANT PLASMA RESONANT FREQUENCY GENERATING RESEARCH SYSTEM: 
The HTML Writer's Guild.
