Can be easily used with all programmable frequency generators / sequencers, and LAPTOP or DESKTOP COMPUTERS
New HIGHER POWER OUTPUT Auxiliary Output Section, redesigned for driving "Monochromatic LED Light Wands", Contact Pads & Handpieces, and now capable of driving the ( New HIGH FREQUENCY MAGNETIC PULSER. Brief Technical Details now on this page )
This system can easily drive two plasma tubes simultaneously when desired, and can optionally also use another plasma tube as a dynamic grounding device.
UL Listed shielded switching 115 /230 VAC internal power supply offers 'continuous operation' capability.
One other option still available and used by some to provide frequency sequences to the 6C EM+ (as well as to the R/B systems) is the stand-alone SEMOIA PG63-7550 "Hammerhead", priced around $720.00, or the ProGen version, at closer to $1000 or more. However, in comparison, the F125 devices offer more capabilities for ther money. If you have these other devices, you can certainly use them with the EM+ systems.
After working with the quick and flexible programming software used to drive the F100 series devices, along with the potential for storing literally thousands of frequency sequences of essentially unlimited length, I have to say that I personally preferred the flexability and ease of programming and use of the F100 seried devices. I expect that having the features and capabilities of the F125 available will make it a very versatile and capable device for use with the System 6C ,7C, or 8CE EM+.
Others researchers who already own them are reporting of using the frequency output capability of the FSCAN 2, while some others report using the GENY-2 (PC internal ISA slot frequency generator card). There are also other products which are available and in use by some researchers. The main thing to keep in mind amongst all of the possibilities: The System 6C EM+ can process inputs from virtually any frequency generator out there. We can provide custom interconnect cables for about anything you might decide to use; inquire.
If you're looking to ease into your research on a more limited budget, keep this in mind: The 6C was also originally designed to be able to accept and process input signals / waveforms from newer laptop computers which are equiped with a sound system / headphone output jack. Testing has been done with several different laptops, including a 1600s COMPAQ Presario, a fairly recent model Gateway, and an older Dell Latitude XPi. The FREX 14 software, by Ken Uzzel, may be well worth evaluating.
The 6C EM+ is also potentially able to accept and process input from portable MP3 players, and from laptop or desktop computers with sound systems playing MP3 format digital music files. Software and information is included in the book supplied with each research system; the book was at over 470 pages on June 18th, 2004, and continues to grow as researchers contribute more research reports and technical discussions. (This book is also available separately; see the request / order page.)
The 6C is designed to retain the ability to operate as a Stand-Alone system, by retaining the internal frequency generating capability that has produced such remarkable results with the previous EM+ models. A Frequency reading meter used in this mode to set / verify output frequency selection. I offer a 4-1/2 digit readout meter which I specially callibrate to read within + / - 1 count at 1000 Hz.
The 6C EM+ retains critical proven design details from previous versions of the EM+ systems that have provided increased operating stability. An RF shielding housing encloses critical signal processing circuitry.
The 6C EM+ retains the Output Power Level setting provisions I first designed and implemented in 1998, while adding selectable higher output levels on the panel, for maximum plasma dynamics and versatility in research / experimental applications. This feature allows each user to set the system for their own personal 'comfort level' when using this resonant radiant plasma system in the contact mode, while also using the stainless steel grounding plate (or when using another plasma tube as a dynamic 'receiving tube' / dynamic active plasma grounding device. It also allows setting for greater plasma dynamics (Radiated E-field Density) when used in the "Radiant Mode".
The EM+ systems have been designed and built for the last several years to easily drive TWO Radiating plasma tubes. Recent research reports now appear to indicate that increased effectiveness is being achieved, in fewer exposure sessions, by utilizing the multiple tube drive capabilities built into this system.
The 6C EM+ also incorporates a multi-purpose Auxiliary Output Section. This can be utilised with special optional accessories either instead of the plasma drive output, or used simultaneously, synchronized together with the Plasma drive.
The Auxiliary Output on the 6C EM+ was redesigned in March of 2002 to offer three types of output capabilities. It now is built with higher drive power level capabilities than in the early models. Besides being able to drive a high intensity LED Monochromatic Light Wands (available in several colors / wavelengths) in a pulsed mode, it is also easily capable of driving the high frequency MagPulse (c) MAGNETIC PULSER Wand on the 2002 and later models of the 6C. I've complied separate research manuals of significant material on each of these technologies as to how they are being implemented.
The Auxiliary output now also has special jacks for use of Contact Pads or Handpieces, which provide both dynamic CURRENT SOURCING, AND dynamic CURRENT SINKING at a pulse amplitude of 12 VDC.
Light Wands and the new "MagPulse" Magnetic Pulser wands are available as optional accessories, including wands that combine the monochromatic light pulsed simultaneously, synchronized with the pulsed magnetic signal: Go to this page for information on requesting / ordering research equipment.
This system is designed to operate continuously if desired, and are being used in that way in treatment applications. It can also be quickly switched for either 115VAC or 230VAC input power. Also available as a custom option is the added capability to operate from any 12 VDC to 15 VDC source. This feature can be added for an extra $50.00
LEADING EDGE RESEARCH APPROACHES Barry Allred is now offering custom tubes in Helium, Neon, Argon, Krypton, and Xenon (as well as in the dynamic E-Gas custom blend) for researchers interested in working with these various noble gasses.
One leading edge researcher has begun to write up reports of using THREE 6C EM+ systems simultaneously, each driving two Allred Triple Bubble Tubes in the radiant mode, and using another tube as a dynamic plasma receiving / grounding device in some applications. (Reported results are phenomenal!) The photo below shows the six different tubes, each with a different gas, being driven by the three 6C EM+ systems. (See the 6C EM+ Research Manual for further information and reports.)
Each of the three 6C EM+ systems is driven by a separate F-150 frequency synthesizer, but the software commanding all three F150s is being run on one computer. A SEALEVEL model 2401 USB to 4 port RS-232 hub device handles the distribution of the separate commands to each of the systems. The photo below shows the Toshiba laptop, hub, and three F150s on the shelf below the LCD monitor. The three tubes visible are energized in this photo.
The photo below is another view of one researcher's treatment room. The six triple bubble tubes are mounted with plastic microphone stands and booms, so that they can be positioned closely on both sides of the treatment table. The treatment table is made of wood and upholstry, rather than metal. (The computer stand is also wood.) Using tube support stands and furniture that are non-metallic, in our understanding is a good approach to minimizing the absorption and loss of radiated signal strength (which has been observed with test equipment in previously reported tests) when metallic fixtures are used in proximity to the plasma tubes / research volunteer.
" Hi Bruce, Could you please describe: what is the EM+ machine? Thank You."
The EM+ is a Resonant Radiant Plasma System, which drives the plasma to resonance directly at the specific selected frequency within the range of ~8Hz to 10KHz+. ( This is commonly referred to as the "Rife Frequency" range). It radiates and induces this plasma resonance into everything within the area for many feet out from the plasma tube.
The approach used in the EM+ systems differs from the technological approach used in the Rife/Bare radiant plasma system design in that it does not need or use an RF carrier. In this EM+ system, high voltage signals, which are generated directly at specific selected frequencies, set up and control the characteristics of the plasma resonance within the plasma tubes. Because of the presence of the magneticresonance aspect of the energy field radiated from the plasma tube in these EM+ systems, it easily penetrates through everything without noticable damping of the signal.
(Since 1998, one doctor in the NE U. S. region has used one of the earlier versions of these EM+ systems by setting it up in a small room on one side of a wall, while having the research subject seated in a chair on the opposite side of the wall. They never actually see the tube, but the wall between does not seem to affect the energy field radiated by the plasma tube. One of his previous patients reports that all of his patients continue to respond very consistently to his treatments, and continue to return for further services. NOTE: There are many misleading statements repeated by misinformed marketers, who try to tell people that either an RF carrier or something like a spark gap generated noise signal is required to get penetration, or that it somehow is supposed to be 'enhancing' penetration. From my tests and observations, and after the many years of reports from many researchers on several continents, the information and observatiobns heavily support the exact opposite.
"The cleaner and more controlled the plasma resonance signal radiated from the plasma tube, and the less associated uncontrolled 'noise' present, the more positive the results that are observed, along with dramaticly less of the types of collateral adverse reactions observed which can be experienced with other systems using spark gap generated noise signals and / or RF carriers. "
Additionally, people who already are experiencing some degree of adverse electro-sensitivity reactions from environmental exposures may possibly be able to better tolerate use of a system which has been designed to effectively generate the resonance within the plasma tube without having any noise and / or RF signals added.
Recent reports are now also confirming what has been theorized and observed over the last several years: that in many cases, the body responds more positively, with less collateral adverse reationd experienced, when lower power output level settings are selected. In the midst of the background clammor today of "MORE POWER, MORE POWER, MORE POWER!" that is so prevalent today, this may sound like herasy.... but results speak for themselves.
The EM+ systems offer the unique "Plasma Resonance Optimization Control" which allows you to match and peak the characteristics of the plasma resonance drive signals to the characteristics of the tube (or series of tubes you have chosen to use. ) The plasma resonance characteristics vary noticably between different tubes, arrays of multiple tubes, frequency being run, and power output level selected. This unique plasma resonance optimization circuitry approach and plasma resonance dynamics peaking capability was our innovation in December of 1997, implemented on the earliest versions of the EM+ resonant radiant plasma systems I designed. The approach has been refined in many subsequent circuitry upgrades, to offer the maximum control of the characteristics of the plasma resonance. This plasma resonance radiates from the plasma tube, and is induced into anything in the area.
(Higher harmonics of the primary resonance are also produced and radiated form the resonance set up within the plasma tube; the technical aspects of resonant plasma physics get complex. The research manual that is included with each system touches further on many technical discussions.)
A Tri-Field Meter will display the plasma tube's radiated E-field density at 100,000 volts per meter at a distance of up to about ten feet from a high volume plasma tube driven by this system when running in the most commonly used frequency ranges. It may not be necessary to use maximum outpower in many cases. With multiple outputlevel settings available, it can also be set for comfortable contact mode usage with any tube.
The plasma tubes driven to resonance on the EM+ systems can be used both in a "Radiant Mode", and also can be used applied directly to chosen target areas when desired for even greater amplitude of induced resonance, without danger of the adverse effects of RF exposures and even RF burns that can be a result of use of other 'modulated RF Carrier' based plasma systems which others offer.
Effectively inducing a selected resonance into the chosen area, at appropriate power amplitudes, is what needs to be done to achieve optimum results; The adjustable power output levels available on all of the EM+ systems allows you options, so that you can tailor your usage to rthat which suits your application.
While there is a powerful radiated signal component which can be measured at a distance, the Maximum resonance can be induced when the researcher is both directly in contact with the plasma tube, and also making contact with a stainless steel grounding plate, or with another plasma tube being used as a dynamic 'Receiving Tube'. Many specialized "Plasma Containment Vessel" (tube) designs have been developed specifically for use with the EM+ systems in collaboration with Barry Allred since 1998, some of which exhibit unusual plasma dynamics. Driving two or three plasma tubes simultaneously is now done simply by plugging the tubes into jacks on the control panel, or using couplers; (a photo elswhere on this web site shows 9 plasma tubes being driven by an earlier model EM+ system simultaneously .)
The EM+ anecdotes page on this web site will give you some idea of the results being achieved with these systems, and the frequencies being used.
Elaborate Internal multi-stage signal conditioning / processing circuitry embedded within the 6C EM+ was custom designed to be able to accept many types of (less than ideal) external input waveforms, converting them to produce the uniquely dynamic plasma drive output signals / plasma radiated waveforms which were found to provide optimum results on the previous (non-computer interfaced) EM+ versions. Tests from many signal sources, including a COMPAQ laptop [headphone jack] have processed Sine, Square wave, Triangle, and Sawtooth waveforms, producing a good drive signal for the plasma system.
This is a totally different and unique circuitry design from the circuitry design developed and used in the earlier EM+ systems. A circuitry revision was completed in January 2002, adding the enhanced capabilities of the redesigned High Output Capability Auxiliary Output Section.
(Please note that, with the total re-design of the 6C control panel as well as the internal circuitry and components in relation to previous models of the EM+, that earlier EM+ models can not be reasonably "upgraded" to the System 6C's mode of operation. The previous models do continue to be very effective systems in their own right, according to reports of researchers.)
With the dynamic variation in plasma drive optimization demands I & other researchers have observed when testing a wide variety of custom plasma tubes, (to achieve maximum available plasma output signal amplitude / dynamics/ plasma radiated E-field strength) and considering the changing optimization requirements of those many tubes as different power output level are selected, the ability to 'fine-tune' the plasma drive characteristics have still been retained in the form of the familiar adjustable 'PLASMA RESONANCE OPTIMIZATION" control which is unique to the EM+ design approach. Peaking the Plasma Resonance Optimization setting (using a special sensor which we also offer) can show an increase in plasma energization / resonance dynamics of as much as 30 % or more, in comparison to other simpler systems which do not incorporate this Plasma Resonance Optimization technology.
As more elaborate software becomes available well into the furture, this function might be implemented completely within the software portion of a future generation of the EM+ system; however, until such software can be created, this well proven method of optimizing the plasma drive characteristics to the specific plasma containment vessel / tube or combination of tubes, your selected power output level setting, and frequency range you choose to use, is still the most dynamic and effective approach anyone has offered. (You can also do as some researchers are inclined to do, and leave it set in one marked position most of the time.... as many researchers have pointed out, there's likely more power available than you may need to use in many research applications.)
For those starting out on a more limited research budget: In reguards to using MP3 files as sequenced frequency sources: "PLAYLISTS" of MP3 frequency files can be sequenced from MP3 player programs. About 100 of the most commonly used frequencies have been built and are available on the CD that is sent with the system, along with some suggestions of software you can use in building more of your own. One example of software which is available for the purposes of building MP3 frequency files is Sound Forge XP 4.5 . This software allows building frequency files fairly quickly.
Creative Labs offers for download (free) the Digital Audio Center, which can convert .WAV format files into MP3 format files, create music / frequency libraries, and build and save 'playlists' - sequences of frequency files to be played as a session.
Feedback from researchers currently working with research systems (which I've provided previously) is valuable and helpful to many, but will not alone provide the answers we'd like to have, in a timely fashion. Other approaches now appear to be necessary. Getting the information into circulation that will ultimately help more people facing serious health challenges- people who's time is running out- should be a priority. While having more research systems out & being used in the hands of researchers around the world contributes to this, much remains unwritten. Hopefully we can make progress in this area.
Please Note: I am presently not shipping these 6C EM+ systems and plasma tubes outside of the U.S.
The System 6C EM+ is available with or without a list of optional components, tubes, and accessories. For further information on costs, options, etc. please click here to visit THIS PRICE LIST & ORDER PAGE. You need to print it out, fill it out, and mail it to me. Call 719-836-2489 if you have further questions; weekday mornings are the best times to find me here and able to talk with you.
The following is the understanding under which research devices and materials are able to be supplied to other individual researchers:
(Let me know what kind of a computer system you intend to use with it when you make your request.
Also understand that anyone receiving research assistance / equipment is expected to share their research results, in order to accellerate the continued development / evolution of this promising approach to Resonant Radiant Plassma Induced Resonance research. )
PLASMA TUBES & GASES
NOTE: While there's a lot of opinions offered by different researchers as to many different plasma gas blends you might try, the incredible results being achieved with the higher pressure E-gas tubes we recommend & use seem to speak for themselves.
The "Plasma Tube Gallery" shows photos of some of the tubes I've had at various times in the past.
The above 4-1/2 digit meter (shown hooked up to an earlier EM+ system) is used when away from your computer, in setting a frequency with the manual internal frequency setting controls. The meter is more closely calibrated to read frequency at plus or minus one digit at 1000 Hz. These custom Import meters are available alone for $110 (plus shipping of $8.00)
The LED light wand shown above was specifically designed for use with the Auxiliary output channel on the System 7C and 6C EM+; it is matched to the pulsed output drive stage's current sourcing capabilities closely, to get the maximum intensity from the Monochromatic LED light emitting devices without danger of over-driving & possibly destroying the current-sensitive devices. The light color / Wavelength produced by this high intensity 2 LED Light Wand is 620 nM. Light output is rated well in excess of 70,000 mcd (This is into an Orange-Red portion of the visible spectrum.
Devices emitting light of other colors can also be incorporated into custom light wands for those wishing to pursue further research into this fascinating field.) The light weight nylon handle allows easy positioning of the LED head against parts of the anatomy which might otherwise be difficult for many of us to easily reach. Light wand designs are also in evolution, and are all built with a special Orgonite core surrounding the LEDs; inquire if you are interested. A booklet of selected compiled Light Therapy research material is included with an order for any light wand.
OPTIONAL EXTERNAL 12 VOLT OPERATION : You can have the system 6C EM+ custom built for optional use from an external 12 to 15 volt power supply. This custom modification includes different control panel graphics, a different three position power switch, an added coaxial power input jack, and an accessory 12 volt 'Car Cord". The "Dual Power" option version is available for an additional $50.00
The System 5AC+A EM+ will continue to be built for interested researchers when requested. This is a system without the computer / frequency sequencer interfacability, for those disinclined to deal with computers, and looking for a system at a lower cost. Each system is custom built when requested by an individual researcher, as my research and consulting schedule allows. A backlog of requests of from 2 to 4 weeks is typical. Call if you have questions.
DISCLAIMER:
Please note: I offer to provide research equipment to individual researchers, at their individual request, as a form of limited 'research assistance'. If, when, and how they then choose to operate such experimental / research equipment is still totally up to them, completely within their control, and beyond mine. Some individuals may need the guidance and help of a health care professional in dealing with their own health challenges, and are urged to find someone they can work with, who will work with them.
I presently offer compiled information in the form of a 500+ page research manual; everything you'd probably like to know may not be included within those pages, but it is highly recommended that you read and understand the operation instructions and cautions before operating this high energy system. The manual is available separately for $58.00 which includes Priority Mail shipping. Entire chapters remain unwritten at any time... there simply is a lack of time, or a lack of reported research results in some cases. Research continues.
The auxiliary output channel implemented on the System 6C+ prototypes may lend itself well to certain diagnostic / testing techniques, such as EAV / Biotron testing for body response to specific induced resonances (as well as kinieseology and other testing techniques.) The concepts on which I've collaborated with other researchers, includes using either contact pads / hand pieces, or the pulsed light mode from the high intensity light wand, without the high energy plasma field present & affecting body energy states, while testing for individual body response to specific frequencies.
Scans of frequencies can now be run by software on driving the 6C EM+ in many possible formats in conjunction with these 'body response testing techniques", (as is already being done with current EM+ systems in the hands of some researchers.)
Jon Brooks was the first researcher to offer brief info on the basic technique for monitoring the voltage drop across a 10 ohm resistor placed in the grounded line in a contact pad usage mode might also be of use. More information and observations from other researchers will be offered later, on results already being produced with related testing techniques (such as EAV and GSR techniques), as time allows. If you do a web search on GOOGLE or NORTHERNLIGHT on the subject of "Galvanic Skin Response Testing" and "Electro-Acupuncture According To Voll" you'll begin to find information on this entire field of research.
EAV testing techniques are being used by several researchers to monitor body response to frequencies being induced with the EM+ system. While researchers need to learn the testing techniques, an EAV testing system is available for about $700 ; call Bob at 480-948-8673 for further information. Using these techniques, frequencies for a given individual ar being selected and then 'adjusted' up or down from listed values by as much as ten to twelve Hertz in some cases, in order to obtain the 'maximum body response'.
This also brings up questions as to the possible limitations in effectiveness of the "program it once and forget it" approach, versus the possible enhanced effectiveness of frequency sequences selected specifically for an individual subject on a specific occasion. Reports of changes, and cyclic shifts in frequencies needed to affect a certain condition over time, continue to come in from some researchers. This is an important subject for further research!
While the published frequency lists are a valuable reference and 'starting point' in trying to determine what frequencies might be most helpful to a specific 'research volunteer' on a specific occasion, the addition of these testing techniques may help researchers to achieve greater effectiveness.
Some software approaches available today are limited in their low frequency output capability to about 37Hz, as the lowest frequency they can produce. Research reports continue to show the usefulness of 8 Hz, 10 Hz, 15 Hz, 17 Hz, and 20 Hz. While one DOS based frequency sequencing software package I'm currently testing is limited to 18.23 Hz on it's low end output, other Windows based applications wil easily produce individual frequencies below that. The GENY-2 will produce 1.44 Hz on the low end. This continues to be a very good option.
The subject of selecting the Sequence in which multiple frequencies are run, as well as selecting specific durations for each specific frequency, and the possible implementation of PAUSES within those frequency sequences, needs to be explored further. While this subject has been brought up on the Email discussion lists in the past, few seem comfortable with the questions brought up... We need to pursue this subject in further research.
Comment from an EM+ researcher: ..."I am so excited that you have decided to start working on the programable version again. Honestly Bruce, the [EM+] is so fanstastic! You should be VERY proud of what you have accomplished! Now, if it can be preprogramed it will be the best thing out there for use in clinics, bar none.
There is a big need in this type of setting for a device that does all that yours does but that the clinic staff can turn on and return to thier many other duties and patients. The Bare units can do that. BUT the RF is unacceptable in most clinics.
That leaves the Bioray at $7000.00 and that is unacceptale for most clinics and it still won't do 1/2 of the
great things your device does. You are so on the right track, I think, that it hurts. I can't wait to see what you come up with next. "
NEW 7-31-2007: THE SYSTEM 9C EM+, A RADIANT PLASMA RESONANT FREQUENCY GENERATING RESEARCH SYSTEM: 
The HTML Writer's Guild.