Friends,
Here's some of the latest discussion between myself & a couple of other researchers which may be of interest to you, including the latest reply & update from Melody. Melody started working with the System 8CE EM+ back in about February of 2005. Prior to that, he was confined in a wheelchair much of the time due to severe Lyme disease, to the extent that she had been loosing consciousness uncontrollably and unpredictably several times a day. Within a few weeks of starting to work with the EM+, she wrote to tell me that she was back riding the horses with her kids. She's not only turned around her own life, but that of many of her family and friends.
[BKS Added Comment:] While there are nine different power output level settings on the EM+ Systems, use of the highest setting is not always the setting which will possibly produce the optimum results with the minimum of collateral "healing reactions".... This would also leave many of us wondering whether a majority of the so-called "Herx / Healing Reactions" that some advocates of other equipment designs are trying to tell us are 'a good sign' but leave some research subjects feeling 'trashed' and 'energeticly unbalanced' for extended periods of time, are in fact a different type of reaction, which can be minimized if power levels and exposure / usage modes are selected properly for each session.
Carlos wrote privately of sometimes ‘feeling tired' after running his EM+ System, and asked about it.
BKS Wrote back:
"I've been telling people for a long time that using the lower / intermediate output power level settings on the 6C EM+ are reported to produce very good results with minimal adverse reactions; this is especially reported by Lyme sufferers. What power level setting have you been using?"
Carlos replied:
I have mostly used the higher power level settings with three tubes. Spreading the power to three tubes seems to weaken the power load.
[BKS Response:]
The test equipment shows that each added tube increases the total radiated field intensity; Waveform shapes also change at higher power levels...
[Carlos:] I am merely wondering if anyone has been able to measure the amount of amperage being received by someone. How would you do this? Would the measuring be the same for pad or for tube?
[BKS] With contact pad machines, you can use a current reading meter in-line with one of the contacts. Resonant radiant plasma exposures are far more complex as to 'measuring' induced resonance aspects / components, and it's very easy to misinterpret what simple meters display.
[Carlos] I am very happy with the results that I have gotten with the 6C EM+. I have never tried a pad type device.
BKS Further comments:
[Confidential Suggestions to possibly increase effectiveness & minimize adverse collateral reactions when running your EM+ system:]
1) Having the research subject(s) drink a large glass of water before a EM+ session, then running the liver & kidney normalization frequencies for a few minutes each, then taking a 15 minute break before starting a treatment session is a very good idea- the body responds better.
2) Ending all frequency sequence sessions with some of the "Beneficial, Normalizing, & Stimulating Frequencies" may also be a very good idea; Simply using "Mickie's Magic Three" at the end of each session is considered a 'standard operating procedure' by many researchers. The underlying concept is that many 'therapeutic' / anti-microbial frequency sequences may still result in an 'unbalanced' state in the body; doing something to help 're-balance' the energetic state of the body at the end of a session leaves people feeling much better afterward.
3) I would suggest you consider this: that you use your Cameron Aurameter techniques or other dowsing, kinesiology, or body response testing techniques to select what might be most appropriate for 'wrapping up' each session as far as appropriate frequencies, as well as in laying out a specific sequence, and selecting the duration of each frequency, repeating / looping functions, etc. (You can also use those techniques prior to each session to select which tubes, output power level settings, & exposure modes are most appropriate for optimum results for each subject.)
4) Being close to the system / tubes yourself while it's running a sequence designed for someone else might be something to minimize if you are finding yourself 'tired' after doing so, as you mention... just because someone else may need certain frequencies, it may not necessarily be the same for you. Rearranging the specific sequencing of a group of frequencies may also help to minimize this, too.
[This, of course, challenges the concept that pre-programmed frequency sequences are OK for everyone... This is a subject which hardly anyone was even willing to discuss or comment upon when I posted it to the Rife discussion lists several years ago.]
NOTE: FOOD FOR THOUGHT: EAV testing by other knowledgeable researchers of their research subjects over extended periods of time have shown that when there's a stage of 'positive body response' to a specific frequency for a few sessions, that there can later be a reduced response, reducing to a 'neutral response' after a while to exposures to that same frequency. Sometimes further continued exposure to the same frequency is reportedly observed to result in a 'negative body response', where the body is observed to actually go into a 'higher resistance / self- protective / blocking' mode... this is counter-productive, as these frequencies have become a 'stressor' factor, rather than a helpful component, and should be eliminated from the session. [Unfortunately, these observations are not in print, so you'll have to proceed from there as you are guided by your own testing and intuition.] This type of stress reaction may also be observed when a fixed carrier frequency is continually used, as in the RF Carrier based RB systems, resulting in reduced response or lack of response by the subject over time or after repeated exposures.
Be Well!! Bruce 10-31-2005
[From Mark W.]
Hi Bruce,
Ireceived a copy of the [message above], & I found it to be informative and full of good insights. While I have upped the amount of water I drink before sessions where I work on my back, I really haven't been doing that with my prostate protocol - but then again, I do drink a LOT of water in a normal day.
I think I'll start incorporating the liver and kidney freq's as well just to see what happens. I'm trying to really pinpoint and isolate the frequencies I need and don't need for my non bacterial prostatitis/interstitial cystitis.
It may be worth mentioning other things I have found (and I think mentioned before to you) that have been helpful in the research I have done thus far. This I'd like to share with everyone using EM+ systems:
Adding Acidophilus to the diet daily. I take the NOW brand, 8 billion CFU type morning and evening, one hour after a meal when your stomach acid is at its lowest. I know exposure to frequencies in this fashion can kill off the bad as well as the good gut flora, so I re-populate it.
Work with locating "opening" frequencies, either by instinct, feel, or pendulum or other dowsing methods. I have found 5000Hz to be good in my case and a few others as far as making a body "receptive" to the other freq's and not going into "defense mode". I'm big on this theory.
When something is getting under control (or nearly cured, as in the case of my mothers arthritis) - cut back on sessions to see what is needed. It sounds miraculous, but my mother only needs to be in front of the tube once a week now to keep things working perfectly. I'm shocked writing this because I have only had the 6C a short while (relatively speaking) and before that she was in awful pain, all the time. She is now doing over 1 hour of exercise 5x / week which includes 30 minutes at a good clip on the treadmill. Not bad for a woman in her 70's!!
Beware of the placebo effect! I have been fortunate because literally every single person I have worked with has been extremely skeptical - to the point that I wondered if sometimes it would even have any effect due to their disbelief that it could aid their situations. Watch and keep records for repeated and long-term results. Dowse if necessary. My father, for example had heel spurs and we used the tube on his foot for pain control since he could not take the meds. Repeatedly, the pain would subside from 8-12 hours. That is reality, not placebo. My mother regaining a full range of painless motion in a severely arthritic hip is not a placebo effect.
Thanks again, Bruce, for the email - and my mother wishes to thank you for the freq's you gave me for her arthritic hip. You've made a bigger difference than you'll ever know in the lives of people I care the most for. My own condition is getting better, by the way. It is a bit trickier to work with, it seems. I think once I get a spiral tube, I may have better results still. Only time and trial will tell.
Sincerely,
Mark W. 10-31-2005 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[From Melody]
Bruce,
Got your e-mail today...very exciting as I have some research to report... The lower power setting of 300 is much more beneficial to all around the EM+ machine. 450 or higher actually will create a mood change on people and headache in some individuals. Not anything crashing just slight changes... While running 300 power setting people become calmer and less agitated. Express feelings of peace. Communication becomes banter and lighthearted... I have done single and group treatments with different power settings... A couple that is always lighthearted was not aware of the power change [up to a higher level] and they actually started yelling at each other while on the machine... They have had numerous sessions... not the numbers, but the power settings affected them... Children react the same as well, to the point of relaxation that will put them to sleep....
My machine is in my house and as health improves the exposure time seems to be less chaotic...
The level of health of the body overall is something that needs to be addressed....more improvement much more benefit from the machine...dehydration levels especially need to be addressed..in fact I won't treat someone until they have a day or two of large amounts of water.
The entire population is dehydrated beyond imagination. The stress of the em treatment is reduced greatly with water from my own experience and many others...
The radiant effect of the machine is also much less irritating at the lower power setting...yet as effective as being on the machine [contact with the grounding plate / tube]... especially with normalizing frequencies they will effect the whole house and no one is on the plate... I would have to say many hours of treatment later that the first two months be careful of exposure time mostly with big kill off from lyme.. After that the time exposure can be increased easily with very slight side effects. Things like mold and fungus I will kill off and run anytime of the day..
Parasites: I like to have people on the plate as a diagnostic as well as I want the parasites dead...
My machine is a true extension of my dowsing and will surprise me sometimes with feedback from the bulbs that I did not expect. I do not like the preprogrammed sets of numbers... They do not take into account the emotional as well as environmental stresses on the body that I can read from someone. I look at the person as a whole; if you listen to someone they will always tell you exactly what is wrong with them... Then the machine confirms it or sometimes I have to back up a bit and dig to the source... Which is usually dehydration along with parasites of some sort... Until parasites are gone all else fails... until lyme is hit many things will not reconcile...
All of my people have hits on numerous parasites...lyme is always a component... no success on numerous people until lyme numbers are run then a plethora of things come bounding out and that is when we are off for the ride... heavy metals and environmental toxins mercury in the teeth.. thulium in the brain, liver overloaded with toxins- that is the body resistance I see... Otherwise the body will respond even when the person does not feel open to it...
I have many non-compliant people... they will want a treatment, & say they believe in it, and have much resistance... The machine and dowsing will always tell me when and what to do...what their body is ready for...the irritating factor at the beginning for me was I would believe what they told me and try to do treatments with very little success....then I started looking at dowsing and the machines feedback and- wa la- all kinds of open avenues to pursue, with a lot of shocking response...
Ebola variant was a huge issue with an ALS patient...it was eating his muscles and nerves alive as were tapeworm.... 23 feet of expelled worm... Military people that have tons of gulf war syndrome responses... they have never been over there but fathers have....
Ran lyme numbers on a guy and he said I didn't really feel anything... the bulbs were going absolutely nuts...he didn't come back for follow up on the released bacteria... his knee burst open with a sore the size of a half dollar piece...I saw him in town several days later; the doctor had just told him he needed to go to the hospital for I.V. antibiotics for an MRSA infection which is heavy staph and he would probably lose his leg as this was bad... I treated him every day for two weeks, no antibiotics... now he has a healed leg.... (but of course he believes he is not positive on lyme...) When I tell him he needs a treatment with follow up he absolutely shows up. By the way, the antibiotics the doctors wanted to use cost 1000.00 a day; they wanted him on a 10 day dose.....wow....we avoided all of that... This man said he did not feel sick and lives with a level of illness that is amazing... no real complaints... he simply gets treatments because he saw me turn around in my health.
There is no such thing as a stress reaction from using the EM+ machine.... many hours of exposure and many treatments run with all varying degrees... EM+ is nothing but good for the body and house... in fact the opposite is true... stress reaction happens without enough treatment...
There is always something beneficial to be run on the machine... killing, cleaning, normalizing, enhancing can keep a person busy all the time. Kill time does not even effect me anymore; (kill time was the only one I ever limited time on... the others do absolute good for the body- radiant or on the plate does not matter.... again referring to others I have read.. The 'peeling the onion' is a fun game and will keep everyone busy for a long time..
324 528 15 is a good way to end... but really any circulation, normalizing, or stabilizing numbers are good to end with... I have created a group of them that i use all the time...
329, 328, 2112, 522, 555, 2489, 146, 15, 14, 17 all work well....
I also like to end with 10000, 6000, 5000, 3000, 2000, 1000...that series will also end an allergic reaction or seizure in about 5 minutes on anyone so far...
Parasites have a reproductive cycle to them... Pay attention to the cycle and you will have effective kill and expulsion. Tapeworms are killed effectively with the EM+ frequency generator that Bruce Stenulson makes.
The "series" is of great importance... start at the bottom and run the whole thing, not a segment of it or trouble will happen... the cool thing is one second kills... on each frequency... the longest lapse i have done is 10 seconds on each frequency... doesn't have to be that long... radiant mode also causes a kill, if you catch them at there reproductive stage.... Mop up is of utmost importance; be ready to scan for any bacteria. Mostly the streps and staphs....campylo and chlamydia are predominant with the tapeworms too...
Lyme is reproductive stage predominant... all three components- actually four... babesia, ehrlicia, bartonella and rocky mtn... Char's numbers are phenomenal in kill off.... a little harsh... Don't do more than 5 new numbers at a time... always seek new lyme numbers.. two treatments of any series is enough for the time... every 2-3 days at first and once health improves more number groups... I have done up to 10 numbers at a time and still did OK very little reaction... Always wait a few hours and scan for bacteria... the pause is important as I have scanned right after a treatment and get no hits... wait 2-3 hours and wa la again hit it hard... then water and sleep...
I have tested the full moon theory and find that is one of the best times for enhancing or stimulating... right after the full moon is a good kill time...
For women treat when they have their menstrual cycle and they will respond greatly.... Men seem to follow the woman's cycle as well...
I keep having a great time with this machine and lots of success... A few fumbling times.... Dowsing has helped that a lot though.... Throw out the pre programmed numbers ( with one exception- Bruce has some wonderful sequences which I use all the time).... and use the machine, dowsing and low power settings... The success rate is high and the great thing is no one goes to the hospital because the body does the rest...
ONE last note- Immune system!!!! Immune system!!!! help it in any way you can...without it you die...
Melody 11-02-2005
BKS Closing comments:
[I do not give out Melody's contact information- please do not ask; but I will continue to incorporate her reports and insights into my research manual, and will be able to pass along some of the material occasionally as it becomes available.]
Melody is certainly not the only one who is working very effectively with the EM+ systems; however, very few EM+ researchers participate on the online discussion groups these days, and few take the time to write up and pass along their research results, insights, and approaches.
None of these anecdotal reports are intended to 'prove' anything, but rather are passed along to offer insight to others as to how the EM+ systems can be more effectively used.
(Few researchers work with the depth of intuitive insight and understanding which Melody has developed / learned to apply to this field of research over the last 9 months; it's been a pleasure to discuss aspects with her throughout her growth in this work, and to be able to encourage her to utilize and rely upon her intuitive abilities.)
Be Well!! Bruce
Click here to visit the page with discussions on "Electro-Sensitivity Reactions", and related adverse reactions to some types of equipment which others have designed, worked around until they developed 'health challenges', or purchased and operated in the past.
The subject of using Body Response testing, kineseology & muscle testing techniques, and various other Dowsing techniques to select frequencies, Power Levels, to lay out specific sequences, and to select exposure durations, etc. is repeatedly mentioned by those who are reporting consistent results working with the EM+ Systems. Let's face it- while there are gerneral recommendations and several lists of compiled frequencies from which you might choose, there are no 'hard and fast rules', as everyone is different, and each research session may therefore be expected to be different.
Pendulum Dowsing techniques have served the purposes of many researchers very well; it's also sometimes referred to as 'Divining', inquiring of the Divine. If you are interested in exploring the use of Pendulum Dowsing techniques further, you can click here. (Use your web browser's 'BACK' button to return here.)
NEW 7-31-2007: THE SYSTEM 9C EM+, A RADIANT PLASMA RESONANT FREQUENCY GENERATING RESEARCH SYSTEM: 
The HTML Writer's Guild.
